Suitable Laminating Pouches; Operating Levels; Preparing For Hot Lamination - Kompernass Lervia KH 4412 Operating Instructions Manual

6. Suitable laminating
pouches
• For hot lamination you can use pouches with
a width of up to 230 mm and a thickness of
maximum 125 Micron.
• Please note that each laminating pouch may
only be used once.
For hot lamination, use only laminating
pouches that are expressly designated
for hot lamination.
For cold lamination, use only laminating
pouches that are expressly designated
for cold lamination.
Note that the laminating pouches in-
cluded with the laminator are intended
exclusively for hot lamination.

7. Operating levels

Switch setting
Foil thickness switch
r
Selector switch
HOT
HOT
COLD
Tip: For high-gloss photos, select the switch setting
"125".
8. Preparing for hot
lamination
Insert the pouch guide
on the rear of the laminator.
Fold apart the pouch guide
Insert the laminator power plug into a power
socket.
Ensure the appliance has a stable positioning.
Switch the appliance on by flipping the ON /
e
OFF switch
t
lamp now glows.
Only activate the pouch thickness
i
switch when the appliance is
switched on.
Shift the pouch thickness switch
sired foil thickness (80 or 125 Micron). The
laminator now heats itself up to the operating
temperature.
• The laminator has reached its operating tempe-
rature as soon as the green LED indicator light
"Ready"
- 22 -
Switch setting
Laminating foil
thickness
i
80 > 60 - 80
125 85 - 125
125 to 200
q
into the holes provided
q
.
. The red ON / OFF Indicator
i
to the de-
y
glows.