Table of Contents
Advertisement
v If the Dual Port 10/100/1000 Base-TX Ethernet PCI-X Adapter device driver is installed, the following
is an example of the data that displays on your screen:
Fileset
-----------------------------------------------------------------------
Path: /usr/lib/objrepos
devices.pci.14108902.rte 5.1.35
Path: /etc/objrepos
devices.pci.14108902.rte 5.1.35
Verify that the devices.pci.14108902.rte filesets are installed at the AIX 5.1.0 or later level.
If this information displays but you continue to have problems, go to Chapter 4, "Installing the
10/100/1000 Base-TX Ethernet PCI-X or Dual Port 10/100/1000 Base-TX PCI-X Adapter," on page
9.
v If no data displays on your screen, the Dual Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
device driver did not install correctly. Return to Chapter 3, "Installing the Device Driver Software," on
page 5. Return to "Verifying the Adapter Installation" on page 9 and continue with step 1 again.
If you continue to experience problems, it may be necessary to call your system support
organization. Refer to your operating system documentation for instructions.
Level
State
Description
COMMITTED
...Ethernet...
COMMITTED
...Ethernet...
Adapter Software
Adapter Software
Chapter 3. Installing the Device Driver Software
7
Advertisement
Table of Contents
