Table of Contents
Advertisement
Putting the handset into service
Charging and using the battery
To charge the battery, insert the handset into the charging shell with the
keypad facing forwards.
The charging status is indicated by the charge status display:
{ lighting white: charged over 66%
{ lighting white: charged between 34 % and 66 %
y lighting white: charged between 11% and 33%
y lighting red: charged below 11%
y flashing red: battery almost empty (less than 10 minutes talktime)
xy xy x{ x{
16
Important:
Only place the handset in the designated charger. (for order num-
bers see
Page 85).
Note:
•
Initial charging: Charge the battery for at least 3 hours without
a break, regardless of the charging status icon. Without replac-
ing it in the charging shell, use the handset until the "battery
low" beep is heard. This action aligns the charge status display
with the operating times of the battery.
•
To attain full operating and charging times: After charging, re-
move the handset from the charger and only replace it when
the battery is fully discharged.
•
For future charging: you can replace your handset in the charg-
ing shell each time it has been used. Charging is electronically
controlled which ensures that the battery is charged optimally.
lighting white: battery being charged
Advertisement
Table of Contents
