Advertisement
I MOUNTING
1. Take the mounting bracket off of the monitor unit.
2. Cut out the cable knock-out, as shown by the dotted lines.
3. Plug the 6-pin connector into slot.
4. Connect the wires to the terminal block. Attach the protection shield.
5. Attach the mounting bracket to a box. Mount the monotor unit onto the bracket.
1
4
FOR MODELS
MK-1GD, MK-1HD,
MK-2MCD, MK-2HCD
MK-2MCD
MK-1GD, MK-2MCD
AIPHONE CO., LTD., NAGOYA, JAPAN
AIPHONE CORPORATION, BELLEVUE, WA, USA
AIPHONE EUROPE N.V., ANTWERP, BELGIUM
6-PIN CONNECTOR
for Optional Functions
MOUNTING INSTRUCTIONS
2
Strip jacket of cable. Put all
the wires neatly into slot to
avoid damage by pinching.
FUNCTION
(WIRE)
{
Ext. device control
(Gray)
porch light, etc.
(Gray)
{
b1∗RY-3DL
(Orange)
b2∗RY-3DL
(Yellow)
{
VIDEO -
(White)
VIDEO +
(Blue)
3
5
1
2
3
http://www.aiphone.com/
Printed in Thailand
0803 A
4
5
6
Advertisement
