Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION • When using electrical appliances basic safety precautions should always be followed. • Check the product before use for any damage. Should you notice any damage on the cable or casing, do not use.
CONNECTION CABLES • DMX-512 connection / connection between fixture. • 3-pin XLR plugs connect the controller with the fixture or one fixture with another. Screened twisted pair cable should be used. DMX Input DMX Output XLR mounting - socket XLR XLR mounting - socket 1.
Page 4
DMX input LED Slave LED Master LED Sound active LED MENU DOWN ENTER • Use the MENU button to cycle through the functions (see table below). • Use the UP and DOWN buttons to set the values for the brightness/speed of the lights.
OPERATION MODES • There are three operation modes Master/slave built-in program. • Connect the lights in series, the first light control the other lights as auto show, sound control show etc. • The first light must be set as master. •...
DMX MODE 3 Channel Mode Channel Value Function Output 000-005 No function 006-020 Mode 1 021-035 Mode 2 036-050 Mode 3 051-065 Mode 4 066-080 Mode 5 081-095 Mode 6 096-110 Mode 7 111-125 Mode 8 Show effect 126-140 Mode 9 141-155 Mode 10 156-170...
Page 7
17 Channel Mode Channel Value Function Output 000-255 SMD dimmer 0-100% 000-007 LED on 008-015 LED off 016-131 Strobe speed slow - fast 132-139 LED on 140-181 LED speed slow - fast 182-189 LED on 190-231 LED slow - fast 232-239 LED on 240-247...