Table of Contents
Advertisement
TeamPoS 2000
Caution: Be sure to observe all ESD precautions and power OFF
procedures
5.1.6 PCI Add-In Card(s)
1.
Remove the front cover (See section 5.1.1).
2.
Remove the side cover (left) (See section 5.1.2).
3.
Remove top cover (See section 5.1.4).
4.
Remove the Retail I/O Board, TeamCOMBO or TeamUSB board (see section 7.12).
5.
Remove the PC card blanking plate by removing one screw.
6.
Install an add-in card.
7.
Secure add-in card with the screw that was holding the blanking plate.
8.
Reverse steps 1 to 4.
5-10
Rev 3.0
MAINTENANCE MANUAL
90000291
Hide quick links:
Advertisement
Table of Contents
