Download Print this page

Specifications - Aiphone MK-DGV Installation Instructions

Vandal resistant black & white pan tilt video door station

Advertisement

SPECIFICATIONS

Power Source:
Consumption:
Picture element:
Image view area
(approx.):
Min. illumination:
Ambient temperature:
Wiring:
Wiring distance:
Dimensions: (HxWxD)
Mounting:
Weight (approx.):
Note:
Only information pertaining to the connection and operation of the MK-DGV and devices interfacing with it are
included here. For complete installation, wiring, and operational information about the MK system, please refer
to the Installation Manual included with the monitor.
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
Supplied by master station.
370mA (max.) 4.5mA (Standby, approximate)
CCD camera
In horizontal position:
When pan-and-tilted:
Less than 1 Lux (at 20" from camera).
14° F ~ 140° F.
2 parallel wires, non-polarized to master. PE Insulated, low capacitance.
Use Aiphone wire # 871802
AWG
22AWG
Distnace
165'
10-3/16" x 7-5/16" x 5/8" (outer panel dimensions)
Flush mount: 9-1/16" x 6-1/8" x 2-11/16" (ABS plastic back box is included)
Surface mount with SBX-DGV: 10-3/8" x 7-7/16" x 3-¼" (top), 2-½" (bottom)
1.90lbs
FCC Class B Verification
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device , pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try and correct the interference by one or more of the following measures:
— Reorient or locate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Toll Free Technical Support:
FAX: 1-800-832-3765
E-mail tech-serv@aiphone.com
Vertical
Horizontal
18"
26"
3'
6'
18AWG
330'
1-800-692-0200
If this
MK-DGV instr.
1005JD
Pg. 3

Advertisement

loading