JVC MultiDyne FS-900 User Manual page 4

3 INSTRUCTIONS
Step 1: Remove the existing battery plate
Unscrew all 4 screws holding the battery plate onto camera. Place
Battery Plate and screws to the side for use later in Step 6.
(for more information visit JVC website: http://pro.jvc.com/splash.jsp)
JVC Pro HD camera back
Step 3: Attach PCB connector
Shown below with camera back mounting attached.
Attaching PCB connector
Step 5: Mount the Camera Back
Install the camera back on the mounting plate and fasten using the
4 #4/40 pan head screws & 2 #4/40 flathead screws that are provided
in the Hardware Mounting Kit.
2 - Flathead Screws
in topside
2 - Panhead Screws 2 - Panhead Screws
in each side in each side
Final mount - Top View (main), Side view (inset)
Instruction Manual, FS-900
Step 2: Attach camera mount plate
Position the camera mount plate on the back of the camera and fasten
using the #6-32 screws that are provided in the Hardware Mounting
Kit
Attaching camera mount plate
Step 4: Camera and Silverback connection
Connect the MCX connector, the power connector, the battery data
connectors and the camera interface connector as shown.
Camera and Silverback connections
Step 6: Connect Battery Plate to Silverback
Connect the Battery Plate. Inter-connect wires. The connectors are
keyed. Then re-attach the Battery Plate using the 4 screws that were
set aside in Step 1. (See inset)
Re-attach Battery Plate
Instruction Manual, FS-900
SYSTEM DESCRIPTION
The FS-900 Triple Studio Camera Interface System is a camera video,
audio, ethernet and data multiplexing system that installs between
three separate JVC ProHD GY-HM890U video cameras and their power
sources. In addition, each camera connects via a single fiber optic cable
to a common Base Station in a truck, studio control room, or other video
production facility. All of the video, audio and data is sent bidirectionally
between the Base Station and each camera over three separate single
fiber cables, one between each camera and the common Base Station.
The Camera Head Unit is attached directly to the camera. The
Camera Head unit is designed to allow the majority of the signals
FS-900 TRIPLE STUDIO CAMERA INTERFACE SYSTEM
MultiDyne FS-900 Triple Studio Camera Interface System
for JVC's GY-HM890 ProHD camcorder
The MultiDyne® Pro HD camera-mounted fiber-optic transceivers are
used to "systemize" HD, 2K and 4K Quad-Link 3G camcorders. It offers
versatility and the ability to configure a camera system to specific
applications. The camera is connected with a series of short patch
cables and then connected to the system's base station (RX) with a
single fiber-optic cable, which can be located near the camera or miles
away.
The FS-900BS1N (Neutrik Opticalcon) and FS-900BS1S (SMPTE)
Supports 3G-SDI 1080p/60 camera feeds and returns. Cost-efficient to
support up to three cameras by each base station, and separate power
supplies provide up to 150 watts for each camera, as well as prompters
and talent monitors.
Key Features
• Supports 1080 50/60p 3G-SDI camera feed and returns.
• HDMI / SDI feeds for high-quality HD teleprompters.
• Gigabit Ethernet for Video-over-IP and web-based RCU.
• Dual redundant power supplies for base station
Hybrid fiber cable for Neutrik and SMPTE
Hybrid fiber cable assemblies are compatible for easy mating to industry standard broadcast camera systems. The rigorous qualification and
intermateability testing program guarantees consistent and reliable results with all compliant systems.
SYSTEM DESCRIPTION
that connect between the Camera and itself to flow thru a 68 pin
connector internal to the Camera and the Camera Head unit.
The FS-900 Triple Studio Camera Interface System consists of the two
main components:
1. The FS-900 Base Station
2. The FS-900 Camera Head
Model numbers of available options:
FS-900BS1S - Base Station with SMPTE connectors
FS-900BS1N- Base Station with Neutrik connectors
FS-900CAM1S- Camera Head with SMPTE connectors
FS-900CAM1N- Camera Head with Neutrik connectors
Front
Back
4