Lennox SCA 010 Installation, Operation & Maintenance Manual page 61

USING THE T7300 THERMOS USING THE T7300 THERMOS USING THE T7300 THERMOST T T T T A A A A A T T T T T USING THE T7300 THERMOS USING THE T7300 THERMOS
THERMOSTAT INSTALLER SETUP OPTIONS
Installer setup
number (press
Select
Not used
a
Fan operation
Output stages of
heating
Output stages of
cooling
System setting
adjustment
(models with
system key)
Not used
Degree
temperature
display
Displaying
temperature
(T7300 F only)
Clock format
Intelligent Fan™
operation
Auxiliary contact
operation
Extended fan
operation in
a
heating
(T7300F only)
Page 60 - IOM / Rooftop Smart and Linéa™ Range
Factory setting
unocuppied
temp. key to
Display Description
change
1 - -
Conventional applications
where equipment controls
2 0
fan operation in heat
mode
Depends
3 on Stages of heat
subbase
Depends
8 on Stages of cooling
subbase
Depends
12 System selection
on model
13 - -
Temperature is displayed
14 0
in °F
15 0 Temperature is displayed
16 0 12-hour clock format
Fan operates con-
tinuously in Occupied
and recovery modes.
17 2 Fan operates with call
for heating or cooling in
Unoccupied mode.
18 0 0 –Time of contact day
No extended fan
operation after the call for
19 0
heat ends
Other choices
(press or key to change)
Display Description
- -
Electric heat applications where
1 thermostat controls fan
operation in heat mode.
0 -No heating
0, 1, 2, or 1 -One stage of heat
3 2 -Two stages fo heat
3 -Three stages of heat
0 – No cooling
0, 1, 2 or 1 – One stage of cool
2 – Two stages of cool
3
3 – Three stages of cool
0 – System setting key is
operational
0, 1 or 2
1 – Auto setting is disabled
2 – Auto setting only
- -
1 Temperature is displayed in °C
1 Temperature is not displayed
1 24-hour clock format
0 - Fan only operates with calls
for heating or cooling in
occupied and Unoccupied
modes.
0 or 1 1 - Fan operates continuously
in Occupied mode. Fan
operates with calls for
heating or cooling in
Unoccupied mode
0 or 1 1 – Economiser contacts
Fan operation os extended 90
seconds after the call for heat
1
ends.
Actual
setting
-
-