Advertisement
Quick Links
NOTE: Always read this manual before using
the MC9100A/MC9700A Airplane ESC.
ESC for brushless motor
dedicated airplanes
INSTRUCTION
MANUAL
Thank you for purchasing an MC9100A/MC970A Airplane ESC.
The MC9100/MC970A mount the latest FET and are ESC for brushless
motor dedicated motor airplanes. Their performance can be displayed to
the full by combining them with the Futaba airplane brushless motor sold
separately.
Before using the MC9100A/MC970A
Mounting precautions
WARNING
[Preparation] Solder the ESC battery connector cords (red, black) to connectors corresponding to the
battery used. In addition, insulate the connector section with heat shrink tubing.
b a t t e r y w h i l e p ay i n g
attention to the polarity.
+ side (red)
or burning inside the ESC.
Short circuits will cause sparking
burning inside the ESC.
MC9100A/MC970A Connection Method
MC9100A
operated by noise, control will be
Operating precautions
WARNING
serious injury.
power is turned on.
control will be lost due to erroneous
water, repair and inspect it.
LED (side)
- 1 -
Such wrapping will cause a loss
CAUTION
the interior. In addition, repair will
erroneously, the propeller will rotate
When not set properly and when
dangerous.
CAUTION
It will cause a burn.
ESC accessory:
Extension cord
connection, etc.
Advertisement
Related Manuals for FUTABA MC9100A
Summary of Contents for FUTABA MC9100A
- Page 1 The MC9100/MC970A mount the latest FET and are ESC for brushless motor dedicated motor airplanes. Their performance can be displayed to Operating precautions the full by combining them with the Futaba airplane brushless motor sold separately. WARNING Before using the MC9100A/MC970A serious injury.
- Page 2 Parameter change method Throttle Position Setting First set the high point and maximum slow point by the following method. (When model type is AIR) Operation Stick [Preparation 1] (State in which the parameter you want to set or check Blink [Preparation 2] Operation Stick...
- Page 3 (2) Cut off voltage setting sound will be generated and operation will become possible. again. (4) Motor direction selection * The direction of rotation can also be changed by changing the motor wiring. (5) Advance timing setting Programmer connection range: Setting item selection arrow buttons (...
- Page 4 (15) Reading setting data saved at programmer gear ratio of the gearbox. (12) Maximum speed display (16) Saving setting data to programmer memory Class Motor Recommended propeller 90-110 MC9100A MC970A MC9100A Functions Load current (peak) Dimensions DANGER Weight Number of cells...