Advertisement
Your two speakers should be identical, if possible, to obtain optimum
results. Experts agree that a perfectly matched system offers the best stereo
phonic reproduction. The speakers should be placed along the same wall ap
proximately 8 to 10 feet apart depending upon room s i z e and furniture place
ment, It may be necessary to experiment with speaker placement until best
results are obtained.
Use any type of wire to connect your speakers to your receiver. Lamp cord
zip cord is excellent and may be easily dressed around the molding for an
inconspicuous and neat installation. Do not drive the staples or tacks through the
center of the wire for this may short out the two sections and will decrease the
overall volume or short out the speakers entirely. It is permissible to use approxi
mately 50 feet of speaker connecting wire for each speaker without loss of
volume. CONNECT SPEAKERS WITH CARE. AVOID SHORTS — THE RECEIVER HAS
BEEN DESIGNED TO PREVENT DAMAGE FROM ACCIDENTAL SHORTING; HOW
EVER, REPETITIVE SHORTING CAN DAMAGE TRANSISTORS.
1.
Connect one length of lamp cord to the left speaker. This is the
speaker on your left as you face the speakers.
2.
Attach the other end of the lamp cord to the terminals marked SYSTEM
1 LEFT located on the rear of the receiver.
3.
Similarly connect another length of lamp cord to your right speaker.
4. Attach the other end of the lamp cord to the terminals marked SYSTEM
1 RIGHT.
5.
Your receiver is now connected for stereo operation and is operative
when the SPKR-l switch on the front panel is in the ON position.
SYSTEM 1
CAUTION
CONNECT SPEAKERS WITH CARE-
AVOfO ACCIDENTAL SHORTS
Advertisement
