Inserting The Batteries - AgfaPhoto DC-8330i User Manual

Inserting the Batteries

The camera is powered by two AA-size alkaline batteries or rechargeable Ni-MH
batteries.
1
Open the battery cover.
Slide the battery cover in the
direction indicated by the
arrow.
2
Insert the batteries.
Insert two AA-size batteries
with the positive (+) and
negative (-) poles matching
the directions indicated
inside the battery room.
3
Close the battery cover.
Low Battery Indicator
A low battery indicator
exhausted. Batteries should be replaced promptly when the low battery indicator
appears.
C a u t i o n
C a u t i o n
Risk of explosion if battery is replaced by an incorrect type dispose of used
batteries according to the instructions.
Be sure to turn off the camera power before insert or remove batteries.
Use only Alkaline or Ni-MH battery to power this camera. Use of any other type
battery is not recommended.
Replace all batteries at the same time. Never mix old and new batteries.
Remove batteries if you will not be using them for a long time.
The camera body may feel warm after extended use. This is normal.
About Battery Type
After replacing the batteries, please check the battery type in the setup menu (
page 19).
appears on the LCD screen when the batteries are nearly
5