Using The Self - Timer & B; Timer & B Urst - AgfaPhoto DC-8330i User Manual

Using the Self-timer & Burst
Use the self-timer to set a delay from the time the shutter button is pressed to the time
the image is shot. Use the burst to record continuous still images shooting.
1
Turn the power on, and set the camera
to the REC mode (
2
Open the REC menu (
Use
from the REC menu.
3
Change the setting.
Press
mode, then press the SET button.
Off:
Record a single image.
2 sec.:
The shutter release will be delay for 2 seconds.
10 sec.:
The shutter release will be delay for 10 seconds.
Double:
Record two images in a shot after pressing the shutter release button 10
and 12 seconds.
Burst:
Keep pressing the shutter button fully to take continuous shooting.
Release the shutter button to stop shooting.
4
Press shutter button to take a picture.
T i p s
T i p s
When using the self-timer function, be sure to use a tripod or place the digital
camera on a level, stable surface.
page 13).
page 16).
to select [Drive mode]
or
or to select a drive
26