MSI Trident Series Manual page 5

Hide thumbs Also See for Trident Series:
Table of Contents

Advertisement

Hard Disk Drive LED
1
This indicator shows the activity status of the HDD. It flashes when the
system is accessing data on the HDD and remains off when no disk activity
is detected.
USB 3.2 Gen 1 Port (Type-C)
2
This connector is provided for USB peripheral devices. (Speed up to 5 Gbps)
USB 3.2 Gen 1 Port
3
This connector is provided for USB peripheral devices. (Speed up to 5 Gbps)
USB 2.0 Port
4
This connector is provided for USB peripheral devices. (Speed up to 480
Mbps)
Important
High-speed devices are recommended for USB 3.2 ports whereas low-
speed devices, such as mouse or keyboard, are suggested to be plugged
into the USB 2.0 ports.
Microphone Jack
5
This connector is provided for microphones.
Headphone Jack
6
This connector is provided for headphones or speakers.
Clear CMOS Button
7
Power off your computer. Press and hold the Clear CMOS button for about
5-10 seconds to reset BIOS to default values.
DisplayPort 1.4 Port
8
Supports a maximum resolution of 4K 60Hz.
Important
Graphics specifications may vary depending on the installed CPU.
For processors without integrated graphics, connect your monitor to the
discrete graphics card.
9
HDMI 2.0b with HDR Port
Supports a maximum resolution of 4K 60Hz.
Important
Graphics specifications may vary depending on the installed CPU.
For processors without integrated graphics, connect your monitor to the
discrete graphics card.
5
Getting Started

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Trident b926

Table of Contents