Advertisement
FM Radio
1. Turn ON the unit.
2. Press Mode selector, set to Radio mode;
3. You can use FM selector choose for FM;
4. When you use the radio for the rst time, press Scan once, unit will auto search
and store radio stations, then you can use PRE/NEXT to select the stored radio
stations.
5. You can also use the PRE/NEXT buttons to manual search for radio stations.
6. You can use the six numbers located on top panel to store your favorite radio
stations.
NOTES:
FM reception maybe di erent in locations, for better reception quality, please use the
Antenna and keep unit far from any electrical distortions.
USB/SD Card Playback
You can play music from USB stick or SD Card using the USB/SD slot on the PA
speaker.
1.Turn ON the unit.
2. Insert your USB or SD card into the slot.
3. Once inserted the USB or SD card unit wlll automatically play.
4. You can use the PRE/NEXT/PLAY/PAUSE to control and play music.
NOTES:
The speaker system can play the following audio le formats: MP3, MP4, WMA.
The USB/SD Card max size is 32GB. Operation may be slower when searching large
memory les. It will need several seconds to respond when your USB/SD Card full of
contents.
4
www.PyleUSA.com
Wireless BT Playback
You can connect your Wireless BT phone or other device to the PA speaker.
1. Turn ON the unit.
2. Press the INPUT button which is located on top control panel.
3. The BT is ON when you hear two tone indicator sound.
4. Use your Wireless BT phone or other device to search for the Wireless BT name
"PYLE SPEAKER".
5. Select the "PYLE SPEAKER" Wireless BT name and wait for the device to pair
automatically.
6. You do not need password and get connected with unit.
7. You can use the VOLUME/BASS/TREBLE to adjust the sound level for Wireless BT,
also you can adjust the Wireless BT music sound through your own phone or other
device.
NOTES:
Check the volume controller both on the unit and on your phone or other device if
there is no sound through the PA speaker during Wireless BT.
Use of External Power
To use the PA speaker longer than the Internal battery life, you can connect the
PA speaker to a external 12V Battery Source.
1. Find the INPUT DC 12V on the top control panel.
2. Use the correct cable to connect the INPUT DC 12V.
NOTES:
The PA speaker will consume the internal battery rst, when it is low, the LOW
BATTERY indicator light located on the control panel will turn on, you can use the
external 12V battery to power on the unit. The external 12V battery will also charge
the internal battery while in use.
5
www.PyleUSA.com
Advertisement
