Table of Contents
Advertisement
1.800.561.8187
Maintenance
Battery Replacement
The battery compartment on the back of the Meter makes it easy to change
the batteries. Use four (4) AA 1.5 V alkaline batteries.
Note: Batteries are not pre-installed in the meter.
1. Make sure that the meter is turned off.
2. Use a screw driver to unscrew the captive screw.
3. Remove the battery cover.
4. Install batteries.
5. Replace the battery cover and secure it with the provided screw.
1
Cleaning
Periodically wipe the case with a damp cloth and mild detergent.
� Caution
To prevent damage to the Meter:
•
The Meter contains no user-serviceable parts. To avoid injury, or
damage to the Meter, do not open the case.
•
To avoid damaging the Meter, do not use abrasives or solvents to
clean the Meter case.
Storage
During longer periods of non-use (>60 days), remove and store the
battery separately.
Service and Parts
Only a qualified technician should service the Meter. For service information,
contact your nearest Fluke dealer or service center.
Specifications
Irradiance
Measuring range ................0 to 1400 W/m²
Resolution ..........................1 W/m²
Measuring Accuracy ...........±(5 % + 5 Digit)
Temperature Measurement
Measuring range (°C) ......... -30 °C to 100 °C (-22 °F to 212 °F)
Resolution .......................... 0.1 °C (0.2 °F / 1 °F @ > 100 °F)
7
www.
.com
2
3
AA 4x
information@itm.com
Advertisement
Table of Contents
