Related Manuals for Braun ThermoScan IRT 1020
Summary of Contents for Braun ThermoScan IRT 1020
- Page 1 ThermoScan Instant Thermometer IRT 1020 Type 6005 Home Model English Use Instructions Guarantee Service Centres...
- Page 2 • If the thermometer is ever accidentally used without a lens filter attached, clean the lens. (See Care and Cleaning, page 17). • Never submerge the Braun ThermoScan Instant Thermometer in water or any other liquid. • When not in use, place the storage cover over the thermometer with a lens filter attached to protect it from damage and dirt.
- Page 3 Thank you for Unlike other thermometers that must be held purchasing the in place for several minutes, the Braun Braun ThermoScan ThermoScan Instant Thermometer takes a temperature in just one second. It takes a Instant Thermometer “picture“ of the infrared heat given off by the...
- Page 4 Components and Product includes the following components: features • Braun ThermoScan Instant Thermometer • Lens Filters (20, plus one on thermometer) • Storage Cover (See Figure 5) • Use Instructions • Labels Not included, but required: • One 9 volt alkaline battery (6 LR 61, MN 1604 9V, alkaline).
- Page 5 This is because the temperature taken at more measured at the ear with the Braun traditional sites ThermoScan Thermometer more closely reflects any rapid changes occurring with the internal (core) body temperature.
- Page 6 “baseline“ temperature. The normal range for ear temperatures taken with the Braun ThermoScan Instant Thermometer is from 35.8°C (96.4°F) to 38.0°C (100.4°F) for all ages.
- Page 7 If a lens filter is damaged, dispose of it and replace it with a new one. Additional lens filters (LF 40) are available at most stores carrying Braun ThermoScan Instant Thermometers, or Figure 10 contact Braun for a store near you.
- Page 8 Change the lens filter after each use. Troubleshooting The Braun ThermoScan Instant Thermometer has been designed to provide feedback to ensure proper usage and accurate temperature taking. In many cases this means that instead of displaying a temperature that is not meaningful, a message will be displayed that will help you take corrective action.
- Page 9 Inspect the lens; if it is damaged, the thermometer must be serviced. • To assure accuracy and sanitary practice, Braun recommends replacing the lens filter after each use. Should you run out of lens filters and need to take a temperature, you may use the following lens filter...
- Page 10 If this thermometer is used in accordance with the Use Instructions, periodic recalibration os not required. If at any time you question the accuracy of measurement, please contact Braun. Lot number The date of manufacture can b determined by identification referring to the instrument LOT number.