Table of Contents
Advertisement
General safety information
Attention!
• Carefully read through this entire manual before using the product.
• Always respect the documented minimum or maximum values of the product.
• For installation and prescribed use of the product, the special notes in these instructions must be carefully
observed and the technical standards relevant to this product must be considered.
• This product must be installed by a trained electrician following applicable safety regulations, standards
and the machine directive.
• Failure to comply with these instructions, operation that is not in accordance with the use prescribed in
these instructions, improper installation or handling of the device can affect the safety of people and the
plant.
• In case of failure to comply with these instructions or the applicable standards, especially when tampering
with and/or modifying the product, liability is excluded.
• The safety functions of the product must be tested before the system is put in operation.
• The safety functions of the product must be tested after installation or replacement of components or
cables.
• The safety functions and the mechanics of the product must be tested regularly to confirm that all the
safety functions are working properly.
• In case of breakdown or damage to the product, contact ABB Jokab Safety, www.abb.com/jokabsafety. Do
not try to repair the product. It might accidentally cause permanent damage, impairing the safety of the
product and in turn lead to serious personnel injuries.
Disposal
The three-position device shall be disposed in accordance with WEEE directive, 2012/19/EU.
2TLC010052M0201_A
8
Advertisement
Table of Contents
