6. OPTIONAL CONNECTION
Note
Only work on the unit when the mains plug has been disconnected
and the stove has cooled down completely�
Note
During assembly / dismantling do not allow objects (screws etc�) to
fall into the pellet container – they can block the screw conveyor
and damage the stove�
Note
During any conversion work, take particular care of your fingers
and any panels and stove attachments� Select soft bases to
prevent scratches to your living space furniture and stove panels�
Changing the connection to the left side
Open the pellet hopper lid�
Open the decorative glass door� Remove the convection fins by
lifting them straight up�
Remove the two screws and remove the left rear side panel�
Mount the cover plate at the cutout to the back wall�
Place the 90 degree elbow with cleaning lid on the flue outlet� Make
sure that everything is tight!
Place the side panel for the bottom side connection into the recesses
and screw it at the top�
Install the removed parts in reverse order�
#25
#2