Fiat Ducato Owner's Handbook Manual page 175

WARNING
Repair and refit the standard wheel as
soon as possible. Do not apply grease to
the bolt threading before assembly: they might
come unscrewed.
WARNING
The jack may only be used to replace
wheels on the car which it equips or
other cars of the same model. Never use the
jack for other purposes, such as lifting other car
models. Never use the jack to carry out repairs
under the vehicle. Incorrect positioning of the
jack may cause the lifted vehicle to fall. Do not
use the jack for loads higher than those shown
on the label.
WARNING
Never tamper with the inflation valve.
Never introduce tools of any kind
between rim and tyre. Check tyre and spare
wheel pressure regularly referring to the values
shown in the "Technical Specifications" section.
Please note that:
❒ the jack weight is 4.5 kg;
❒ the jack requires no adjustment;
❒ the jack cannot be repaired. If it breaks it must be
replaced with a new jack;
❒ no tool other than its cranking device may be fitted
on the jack.
WARNING
No tools other than the crank provided
should be used with the spare wheel
lifting device; it should be operated by hand
only.
To change a wheel proceed as follows:
❒ stop the vehicle in a position where it does not pose
a danger for on-coming traffic and where you can
replace the wheel safely. The ground must be flat
and sufficiently compact;
❒ turn the engine off and pull up the handbrake;
❒ engage first gear or reverse;
❒ wear the reflecting safety jacket (compulsory by law
in certain countries) before getting out of the
vehicle;
KNOWING
YOUR CAR
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
171