Online Setup - Emerson Epsilon Eb Series Reference Manual

Epsilon Eb and E Series EN Drives Reference Manual
To assign an Output Function to an Output Line:
1. Assign an output by highlighting an output function in the "Output Functions" window
and selecting the desired output radio button or by dragging the highlighted output
function to the desired output in the "Output Lines" window.
2. To unassign an output function from an output line, select the desired output function
from the "Output Functions" window, then select the "Unassigned" radio button or by
dragging the highlighted output assignment back to the "Output Functions" window.
To make an Output Function "Active Off":
1. Select the desired output function in the "Output Lines" window.
2. Click the "Active Off" check box. The Active State column in the "Output Functions"
window will automatically update to the current setup.

Online Setup

If you have previously created a configuration file, go to Step 3. If you do not have one done,
go to Offline Setup Step 1. Do Steps 1 through 9 in the previous section, "Offline Setup",
before establishing conmmunications.
Note
Generally, online setup is used when editing parameters in a drive. Offline setup editing
is usually only done when not connected to a drive.
Step 1: Establishing Communications with Drive
Now that the basic E Series drive setup parmeters are entered, it is time to establish
communications with the drive and download the configuration data. Before proceeding, be
sure to connect the serial communication cable between your PC and the drive.
The first step in establishing serial communications is to select the Com port and the baud rate
using the procedure below:
1. Clicking on the Options menu.
2. Select the "Preferences|Communications" option.
3. Select the "Configure Serial Port" option. The Communications Setup dialog box below
will be displayed.
18
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com