Installing The Configuration Utility - ActionTec 14 Mbps HomePlug Ethernet Adapter User Manual

Actiontec HomePlug Ethernet Adapter User Manual
5. Insert the other end of the Ethernet cable into an Ethernet port on a router/
gateway connected to a computer.
Next, follow the instructions in the next section, "Installing the Configuration
Utility."

Installing the Configuration Utility

After connecting the Adapters, install the Configuration Utility:
1. Insert the Connection 1-2-3 CD in the CD-ROM drive of the computer con-
nected to an Adapter.
2. When this window appears, click Finish.
3. Repeat for other computers connected to an Adapter.
The HomePlug Adapters are now connected and ready to use, and the
Configuration Utility is loaded on the computers. Go to chapter 3, "Using the
Configuration Utility" for information about changing the default configuration
settings of the Adapter.
6