Dell UltraSharp U2422H User Manual page 15

6 USB-C upstream port
(video + data)
7
DisplayPort
8 USB-C upstream port
(data only)
Connect the USB-C to USB-C cable that
came with your monitor to the computer or
mobile device. This port supports USB Power
Delivery, Data, and DisplayPort video signal.
The super speed USB 10 Gbps (USB 3.2
Gen2) Type-C port
transfer rate and the alternate mode with DP
1.4 supports a maximum resolution of
1920 x 1080 at 60 Hz, PD 20 V/4.5 A,
15 V/3 A, 9 V/3 A, 5 V/3 A.
NOTE: USB-C is not supported on versions
of Windows prior to Windows 10.
DisplayPort output for MST (multi-stream
(out)
transport) capable monitor. To enable MST,
see Connecting the Monitor for DP Multi-
Stream Transport (MST)
NOTE: Remove the rubber plug when using
DisplayPort out
Connect the USB-A to USB-C cable that
came with your monitor to the computer. This
port
Gbps (USB 3.2 Gen2). Once this cable is
connected, you can use the USB connectors
on the monitor.
NOTE: USB-C is not supported on versions
of Windows prior to Windows 10.
NOTE: Remove the rubber plug when using
USB-C upstream port
connector.
offers the fastest
Function.
connector.
supports USB data transfer at 10
About Your Monitor
(data only)
│
15