Table of Contents
Advertisement
6
Using Smart Test and SignalWizard
2 Press <Menu> to further investigate channels, errors or
path trace messages (select Next Error, Previous Error,
Expand or Collapse). If any STS/AU contains VT/TU tribu-
taries, you can view a tributary in more detail. Select the
channel, press <Menu>, then select Expand.
For information on path trace messages, see "Monitoring
Path Trace Messages" on page 66.
3 To close SignalWizard, do one of the following:
Press <Smart Test>, choose Stop Wizard then press
<Select>.
Press <Menu>, choose Exit then press <Select>.
Before closing SignalWizard, you can automatically config-
ure the transmitter and/or receiver settings to match the
signal being applied to the instrument (not available in Thru
mode). This feature is useful if you intend doing further test-
ing. It saves you from having to manually configure the
instrument settings.
62
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Transmission Test Set Quick Reference Guide
Advertisement
Table of Contents
