Table of Contents
Advertisement
2
Getting Started
DS1 Clock In
Bantam 100 ohm (nominal) connector for a DS1 BITS external
reference clock input.
2 MHz Clock Out
BNC 75 ohm (nominal) unbalanced connector for a 2 MHz MTS
clock reference output. Generated relative to the selected
transmit reference clock.
DS1 Clock Out
Bantam 100 ohm (nominal) connector for a DS1 BITS clock ref-
erence output. Generated relative to the selected transmit ref-
erence clock.
TX Eye Clock 52 - 2.5 Mb/s
SMA connector providing a TX Eye Clock signal (at 1/4 of the
line rate) which can be used to trigger an oscilloscope when
examining data signals.
TX Eye Clock 10 Gb/s
SMA connector providing a TX Eye Clock signal (at 1/16 of the
line rate) which can be used to trigger an oscilloscope when
examining data signals.
Transmission Test Set Quick Reference Guide
27
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
