Reattach Torsion; Remount The Awning; Verifying The Installation - Dometic 8700 Series Service Manual

Servicing the awning
3.6

Reattach torsion

➤ Proceed as shown to reattach the torsion rods (fig. t, page 18).
t
!
WARNING!
Do not remove the nail from torsion rod until both arm caps are secured
to corresponding front channels, and awning safety lock lever is in roll
down position. Otherwise, rapid casting spin off will occur. Spring
tension will attempt to spin the hardware and/or fabric roller tube
quickly and unexpectedly.
3.7

Remount the awning

➤ Proceed as shown in the installation and operating manual.
3.8

Verifying the installation

➤ Verify the installation by operating the awning according to verify all parts are
functioning correctly (see Installation and Operating Manual).
18
3.
1.
2.
Dometic8700
EN