Fiat TIPO 5DOOR Owner's Handbook Manual page 262

At the bottom: information on the
track being played and the following
graphic buttons:
"Bluetooth": for a Bluetooth(R) audio
source, opens the list of devices;
"Browse" for a USB source, opens
browsing;
/ : select previous/next
track;
: pause track being played;
"Audio": access to the "Audio
settings" screen.
Track selection
The "Tracks" function allows you to
open a window with the list of tracks
being played.
The choices available depend on the
device connected. For example, on a
USB/iPod device you can also scroll
through the list of artists, genres and
albums available on the device
depending on the information present
on the tracks using the BROWSE
ENTER button/knob or by means of the
e graphic buttons.
Within each list, the "ABC" button
allows the user to skip to the desired
letter in the list.
NOTE This button might be disabled
for some Apple® devices.
260
NOTE The BROWSE ENTER button
does not allow any operation on an
AUX device.
Bluetooth® SOURCE
This mode is activated by pairing a
Bluetooth ® device containing music
tracks with the system.
PAIRING A Bluetooth®
AUDIO DEVICE
To pair a Bluetooth ® audio device,
proceed as follows:
activate the Bluetooth ® function on
the device;
press the "Media" button on the
display;
press the "Select device" button;
select the Bluetooth ® Media
source;
press the "Add device" button;
search for Uconnect™ on the
Bluetooth ® audio device (during the
pairing stage a screen is displayed
showing the progress of the operation);
when requested by the audio device,
enter the PIN code shown on the
system display or confirm on the device
the PIN displayed;
if the pairing procedure is completed
successfully, a screen is displayed.
Answer "Yes" to the question to pair the
Bluetooth ® audio device as favourite
(the device will have priority over all
other devices to be paired
subsequently). If "No" is selected, the
priority is determined according to the
order of connection. The last device
connected will have the highest priority;
an audio device can also be paired
by pressing the "Phone" graphic button
on the display and by selecting
"Settings" or, from the "Settings" menu,
selecting "Phone/Bluetooth".
IMPORTANT If the Bluetooth®
connection between mobile phone and
system is lost, consult the mobile
phone handbook.
USB/iPod SOURCE
To activate the USB/iPod mode insert
the corresponding device (USB or iPod)
in the USB port located in the central
console.
When a USB/iPod device is inserted
with the radio on, it starts to play the
tracks on the device if the "AutoPlay" is
set to ON in the "Audio" menu.
NOTE The Radio may change the track
being played by modifying the
name-device in the Bluetooth settings
of the telephone (where provided), if the
device is connected via USB after the
Bluetooth connection.