Fiat TIPO 5DOOR Owner's Handbook Manual page 141

reinsert the bulb-bulb holder
assembly in its housing, then turn the
assembly 2 clockwise, making sure that
it is blocked.
135
P1030194-000-000
Front fog lamps
To replace the bulb 2 fig. 132, proceed
as follows:
steer the vehicle wheels inwards;
undo screw 1 fig. 136 using the
screwdriver provided and remove
inspection flap 2;
136
turn the bulb-bulb holder assembly
3 anticlockwise by a 1/4 turn and
extract it;
disconnect the electrical connector
and replace the complete assembly;
reconnect the electrical connector to
the new bulb-bulb holder assembly;
fit the assembly in its housing,
turning it clockwise and making sure
that it is blocked properly;
finally, refit the inspection flap 1.
Daytime running lights (DRL)
The daytime running light bulbs 4
fig. 132 are LED to increase their
lifetime; therefore, they should not
require replacing. Contact the Fiat
Dealership in the event of any kind of
problem.
Side turn light
To replace the bulb, proceed as follows:
press the lens 1 fig. 137 to compress
in the internal clip 2, then pull the
cluster outwards; take great care not
damage the paintwork;;
turn the bulb holder 2 anticlockwise,
then extract the press-fit bulb 3 and
replace it;
refit the bulb holder 2 in the lens
P2000135 1 and turn it clockwise;
refit the cluster making sure that the
internal clip clicks into position.
137
P1030251-000-000
139