High beam (2)
1. Rotate the cap anticlockwise and
remove it.
2. Disengage spring clip from
retainer by moving it forward and
to the side. Swivel spring clip
downwards.
3. Withdraw the bulb holder from the
reflector housing.
4. Detach the bulb from the bulb
holder and replace the bulb.
5. Insert the bulb holder and install
spring clip.
Fit the cap and rotate clockwise.
Front turn lights
In case of defective LEDs, have them
replaced by a workshop.
Vehicle care
Side light
In case of defective LEDs, have them
replaced by a workshop.
Daytime running light
In case of defective LEDs, have them
replaced by a workshop.
Front fog lights
The bulbs are accessible from the
underside of the vehicle.
1. Undo screw with a screwdriver
and remove the faceplate.
231