Sylvania SP563-BLACK Manual

Retro Wireless Speaker
SP563-BLACK/BLUE/PINK
SYLVANIA is a registered trademark of OSRAM Sylvania Inc. used under license.
Thank you for purchasing this product. Please read this manual
carefully, and save it for future reference.
Device Overview
Front Panel
Back Panel
6
1. Power ON/OFF Switch
2. LED Indicator
3. AUX in Port
4. Micro USB Charging Port
5. Mode Button (Change mode: Bluetooth, FM Radio, Aux-In)
6. FM Radio Antenna
Included In the Box
1. Speaker
2. Micro- USB Charging Cable
3. 3.5 mm Audio Cable
4. User Manual
5. Warranty Card
Specifications
Speaker Driver: 3"
Bluetooth Version : 4.1
Bluetooth Range: 33ft (10m)
FM: 87.5 ~108.0MHZ
Battery: 1200mah rechargeable lithium battery
Charging: DC 5V --- 1 A
Device Operation
Charging the Speaker
Attach the small connector of the supplied micro-USB charging
cable to the micro-USB charging port on the back of the speaker.
Attach the other connector to the USB port on your computer, a
USB charging device, or a 5V USB Adapter (not included) and
plug into a wall socket.
The charging LED indicator will turn RED while charging and turn
FM Tuner Dial off when the speaker is fully charged.
Note: - Before moving or installing this product, make sure the
Speaker
Power switch of the unit is in OFF position.
- Disconnect the USB cable from the speaker when unused
Volume Knob
for long periods of time.
Powering ON/OFF
Turn the speaker ON by moving the [POWER] switch to the ON
position.
Turn the speaker OFF by moving the [POWER] switch to the OFF
position.
1
Bluetooth Mode
2
1. Turn the speaker ON by moving the [POWER] switch to the
3
ON position. A tone will be heard and the speaker will turn on
in FM radio mode. Press the [MODE] button to switch modes.
4
When the speaker is in Bluetooth pairing mode, the LED
indicator will quickly flash GREEN.
2. Set your mobile device to search for Bluetooth devices. When
5
it appears, select Sylvania SP563 from the list of found devices.
3. Once successfully paired, a tone will be heard and the LED
Note: - Playback is controlled through your connected device,
Aux-In Mode
1pc
Attach one connector of the supplied 3.5mm audio cable to the Aux
1pc
in port the back of the speaker, Attach the other connector to the
1pc
headphone jack on your media-playing device.
1pc
1pc
When plugged in, the speaker will automatically switch to AUX
mode, and the LED indicator will turn solid RED. Playback is
controlled through your connected device. Volume adjustment
can still be controlled with the volume knob on the front of the
speaker.
Using the FM Radio
For best reception, extend the FM radio antenna. You may need
to adjust or position the antenna for certain stations.
· When in FM radio mode, the LED indicator will flash RED.
· Use the FM tuner dial on the front of the speaker to select a radio
Note: - When powering on, it will automatically go to FM Radio
LED Status
TROUBLE SHOOTING GUIDE
For service assistance and product information,
please call: 1-800-968-9853.
Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3
www.curtisint.com
indicator will slowly flash GREEN.
volume adjustment can be controlled with the volume knob.
- After the unit has paired and connected, it will re-connect
automatically when the unit is powered on and the device
is in range.
station.
mode.
- Control the volume through the volume knob.
Green Solid Powering on
Green flash quickly bluetooth waiting for pairing
Green flash slowly Bluetooth paired
Red flash slowly FM radio mode
Red solid Aux-In mode / charging
- Make sure the power switch is set in the
"ON" position.
No power
- Speaker needs to be charged
- Check whether the volume is set at
No sound
minimum level.
- Speaker needs to be connected/re-paired
Unit doesn't connect to device
to device