Fortinet FortiGate-6000F Series System Manual page 26

FortiGate-6000F hardware assembly and rack mounting
3. Pull the middle rails out from the front of the outer rails until they lock into place.
4. Use a lifting device to raise the FortiGate-6000F to allow you to align the inner rails with the middle rails.
5. Slide the inner rails into the middle rails until the lock out tabs on the inner rails click into the front of the middle
rails. Keep the rails aligned and apply even pressure to both sides of the FortiGate-6000F while doing this.
6. Slide the release tabs forward on both inner rails at the same time.
7. Push the FortiGate-6000F all the way into the rack until the system release buttons click into the locked position on
the front of the rack.
8. Use a screw driver to install four rack screws into the handle brackets on the front of the FortiGate-6000F to secure
it in the rack.
FortiGate-6000F 6.4.2 System Guide
Lock out tab
Release Tab
Fortinet Technologies Inc.
Middle rail
26