IDE Primary Channel Master
This parameter specifies the current configuration of the IDE device
connected to the master port of the primary IDE channel.
IDE Primary Channel Slave
This parameter specifies the current configuration of the IDE device
connected to the slave port of the primary IDE channel.
Total Memory
This parameter specifies the total system memory. The memory size
is automatically detected by BIOS during the POST (Power-On Self
Test).
If you install additional memory, the system automatically
adjusts this parameter to display the new memory size.
1st Bank/2nd Bank/3rd Bank/4th Bank
This parameter indicates the type of DRAM installed in the DIMM
sockets. The
setting indicates that there is no DRAM installed.
None
For the location of the DIMM sockets, refer to the System Board
Layout.
Serial Port 1
This parameter indicates the serial port 1 address and IRQ setting.
Serial Port 2
This parameter indicates the serial port 2 address and IRQ setting.
Parallel Port
This parameter indicates the parallel port address and IRQ setting.
3-6
Altos 9100B System Guide