5: Connecting To A Fire Alarm Control Panel (Facp); 6: Connecting To The Pnet-1 Surge Suppressor - Honeywell Notifier NFN-GW-EM-3 Installation And Operation Manual

Connections
2.3.5 Connecting to a Fire Alarm Control Panel (FACP)
Panel is shown for illustrative purposes only. The
NFN-GW-EM-3 is mounted within the FACP cabinet and
connected with the NUP connection located on the
FACP.
2.3.6 Connecting to the PNET-1 Surge Suppressor
NFN-GW-EM-3 Installation and Operation Manual — P/N LS10017-000NF-E:D1 5/1/2019
FACP
Figure 2.10 Connecting to an FACP
NFN-GW-EM-3
Figure 2.11 Connecting to the PNET-1
NUP Cable Provides Both
Power and Communication
From FACP
NUP Connector
NFN-GW-EM-3
J3
PNET-1
Installation
To NUP "A"
(J4) only
Not Used
Ground
21