D-Link DWR-956M User Manual page 42

Interface: ETH
Mode: Con-bridge
Connection Name: Assign a name for the connection here.
Enable: Tick this to enable this connection.
Enable VLAN: Whether to enable or disable VLAN settings on the WAN connection.
Choosing this option displays other options on the page, and each of these is
documented below.
Service Type: The service type for the WAN connection. This can be TR069 or VOIP.
Click Advanced Settings to reveal more settings.
Mode: Con-bridge (Advanced Settings)
VLAN PassThrough:
Whether to enable or disable passing VLANs through from the WAN connection.
Tick this to enable VLAN pass through. This is un-ticked by default.
Bound Ports: These are the ports that are bound and that can share
the same service type. Tick the LAN or SSID ports to bind these ports.
Note: A greyed-out port means it has been bound.
Click Apply to save your settings. Click Back to cancel and return to the previous screen.
Click Refresh to update the current screen.