Cross-Talk Settings - Alesis DM10 Setup Manual

(ie. If you would like to adjust the main head area of the snare drum, choose SnrHd. If
you want to adjust the snare drum rim area, choose SnrRim, etc.)
3. Press F2 (TRIG).
4. Use the CURSOR buttons to highlight the Threshold field.
5. Use the VALUE/TEMPO dial to increase or decrease the Threshold setting of the
affected trigger.
6. Press the DRUM KIT button to return to the main screen.
Quick Link to this part of the video
ReTrigger
The ReTrigger setting focuses on how quickly one strike comes after another, rather than how
much force a pad is being hit with. By adjusting the ReTrigger setting higher, any accidental
secondary hits that come immediately after the first intentional hit, will be eliminated. The lower
the setting, the more likely the second hit will be heard.
To adjust this setting, follow these steps:
1. From the main screen, press the EXT TRIG button
2. Use the CURSOR buttons to highlight the Input field.
Once the Input field is highlighted, use the VALUE/TEMPO dial to choose the trigger
you want to adjust.
(ie. If you would like to adjust the main head area of the snare drum, choose SnrHd. If
you want to adjust the snare drum rim area, choose SnrRim, etc.)
3. Press F2 (TRIG).
4. Use the CURSOR buttons to highlight the ReTrigger field.
5. Use the VALUE/TEMPO dial to increase or decrease the ReTrigger setting of the
affected trigger.
6. Press the DRUM KIT button to return to the main screen.
Quick Link to this part of the video

Cross-talk Settings