Table of Contents
Advertisement
Change Channel Subscriptions
Change Channel Subscriptions
Only the channels that you're subscribed to display in your PTT app. Only the system administrator can
change what channels display.
Note
Your system administrator controls PTT channel subscriptions. You can see which channels you're subscribed
to and which you can transmit on, but you can't change or add to the list.
Procedure
Contact your administrator to change your subscriptions and transmission permissions.
Send a PTT Broadcast
You can send PTT broadcasts over your default PTT channel, or over a different channel. For example, you
may want to send a broadcast over an active PTT session that is on a different channel than your default
channel.
When you're done speaking and release the PTT button, the phone enters a ten-second wait period. During
this time, the channel is open to receive or send more broadcasts. If no activity occurs within the wait period,
the PTT session closes. The wait period keeps the channel open and gives anyone subscribed to that channel
time to join the conversation.
Before you begin
If your phone is password protected, unlock your phone to send a PTT broadcast.
Procedure
Step 1
If you're not on the desired channel, access the PTT
tab or click a leg of a conversation from the Activity
Step 2
Press and hold the programmed PTT button.
Step 3
After you hear a beep, hold the phone microphone approximately two inches (five centimeters) from your
mouth and speak.
Step 4
Release the programmed PTT button.
Related Topics
Cisco Webex Wireless Phone 800 Series User Guide
70
Change the Default PTT
Channel, on page 69
app and tap the desired channel from the Channels
tab.
Push to Talk App
Advertisement
Table of Contents
