Table of Contents
Advertisement
64
•
Select Exit (No Save) on the Exit menu.
•
Press the Enter key to close the BIOS setup utility without saving
any changes.
•
Alternatively, you can select Cancel or press the Esc key to keep the
BIOS setup utility open.
Retype the password in the Confirm new password field.
Default Settings
This menu item allows you to restore the default BIOS settings, before
closing the BIOS setup utility and rebooting the computer. The default
settings are the configuration that was set in the factory.
•
Select Default Settings on the Exit menu.:
•
Press the Enter key to load the default settings. The BIOS setup
utility will close, and the computer will reboot with the default
BIOS settings.
•
Alternatively, you can select Cancel or press the Esc key to keep the
original settings. In this case, the BIOS setup utility will remain
open.
Software
Advertisement
Table of Contents
