Pnp/Pci Configurations - Abit SG-80 User Manual

3-20 Chapter 3
[Power Off]: When power returns after an AC power failure, the system's power
remains off. You must press the Power button to power-on the system.
[Power On]: When power returns after an AC power failure, the system's power will
be powered on automatically.
[Last State]: When power returns after an AC power failure, the system will return to
the state where you left off before power failure occurs. If the system's power is off
when AC power failure occurs, it will remain off when power returns. If the system's
power is on when AC power failure occurs, the system will power-on when power
returns.
3.2.6.

PnP/PCI Configurations

These options configure how PnP (Plug and Play) and PCI expansion cards operate in
your system. Both the ISA and PCI buses on the motherboard use system IRQs
(Interrupt ReQuests) and DMAs (Direct Memory Access). You must set up the IRQ
and DMA assignments correctly through the PnP/PCI Configurations Setup utility for
the motherboard to work properly. Selecting PnP/PCI Configurations on the main
program screen displays this menu:
Resources Controlled By (Auto(ESCD))
You should leave this item at the default Auto(ESCD). Under this setting, the system
dynamically allocates resources to Plug and Play devices as they are required.
SG-80 Series