Abit AW8-D User Manual page 26

To connect SATA device:
1. Attach either end of the signal cable to
the SATA connector on motherboard.
Attach the other end to SATA device.
2. Attach the SATA power cable to the
SATA device and connect the other end
from the power supply.
To convert between PATA and SATA:
The optional "SERILLEL"
convenient accessory to convert
between parallel and serial devices
for this type
designed with the SATA controller
from Silicon Image.
2-18
is a
of motherboard
AW8D