Sprecode Key - Aastra 9480i User Manual

Sprecode Key

You can set a key to automatically activate specific services offered by the server by setting a key
to "sprecode". For example, if the sprecode value of *82 is configured, then by pressing the key,
*82 automatically activates a service provided by the server. The value you enter for this field is
dependent on the services provided by the server. Contact your System Administrator for
information about available services.
Setting a Sprecode Key
Aastra Web UI
Use the following procedure to configure a sprecode softkey on the 9480i CT phone.
1. Click Operation->Softkeys and XML.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select Sprecode.
4. In the "Label" field, enter a label to display on the IP phone for this softkey.
5. In the "Value" field, enter the appropriate value for accessing specific services from the server.
Note:
For values to enter in this field, contact your System Administrator.
6. Check (enable) or uncheck (disable) the "Connected" state to apply to this softkey.
7. Click to save your changes.
Model 9480i CT IP Phone User Guide 101