Lubrication Points - Land Pride RTA2562 Operator's Manual

Section 4: Maintenance & Lubrication

Lubrication Points

Lubrication
Legend
28
RTA2562, RTA2570, & RTA3576 Rotary Tillers 311-254M
Table of Contents
Multi-purpose
spray lube
33050
33050
14618
14579
Multi-purpose Multi-purpose
grease lube oil lube
Driveline U-Joints
Add grease to the driveline u-joint every 8 hours of
operation.
Type of grease = Multi-Purpose
Quantity = Coat Generously
Driveline Shield Bearings
Add grease to the driveline shields every 8 hours of
operation.
Type of Lubrication: Multi-Purpose
Quantity = 6 pumps
Driveline Profiles
Disconnect driveline from the tractor and slide apart.
Clean and coat the inner tube of the driveline with a light
film of grease and then reassemble.
Type of grease = Multi-Purpose
Quantity = Coat Generously
Bearing on Right End of Rotor Shaft
Grease bearing on right end of rotor shaft until grease
starts to purge from the relief hole in the bearing mount
casting on the inside of the tiller end plate.
Type of grease = Multi-Purpose
Quantity = Coat Generously
50
Intervals in hours at which
lubrication is required
Hrs
8
Hours
8
Hours
20
Hours
8
Hrs
1/18/21