Configuring Acd Auto-Available Timer Using Configuration Files - Aastra 53i Release Note

IP Phone Release Notes 2.1
Sylantro Interoperability Features

Configuring ACD Auto-Available Timer Using Configuration Files

You use the following parameters to configure an ACD auto-configuration timer
in the configuration files:
• acd auto available
• acd auto available timer
Parameter –
acd auto available
Auto Available
(in Web UI)
Description
Format
Default Value
Range
Example
Parameters –
acd auto available timer
Auto Available Timer
(in Web UI)
Description
Format
Default Value
Range
Example (<mac.cfg>)
76
Aastra Web UI Basic Settings->Preferences->
Auto Call Distribution Settings
Configuration Files aastra.cfg, <mac>.cfg
Enables the ACD timer to automatically reset the IP phone status to
"available." Set to 0 = Off, Set to 1 = On
Binary
0 (disable)
0 (disable)
1 (enable)
acd auto available: 1
Aastra Web UI Basic Settings->Preferences->
Auto Call Distribution Settings
Configuration Files aastra.cfg, <mac>.cfg
Specifies the length of time, in seconds, before the IP phone status
switches back to "available."
integer
60 (seconds)
0 to 120 (seconds)
acd auto available timer: 60
RN-001029-00, Rev 03, Release 2.1