Properties
1.1
2AO I HF analog electronic module (6ES7135-4MB02-0AB0)
Properties
● 2 outputs for current output
● Output range:
● Isolated from the load voltage L+
● Supports isochronous operation
● Supports I&M functions
General terminal assignment
Note
Terminals 4, 8, A4, A8, A3 and A7 are only available at specified terminal modules.
Terminal
Assignment Terminal
1
QI
0
2
n.c.
3
M
ana
4
n.c.
A4
AUX1
A3
AUX1
2AO I HF analog electronic module (6ES7135-4MB02-0AB0)
Manual, 04/2007, A5E01076972-01
– ± 20 mA, resolution 15 bits + sign
– 4 mA to 20 mA, resolution 15 bits
– Minimum time for the synchronous DP cycle (T
– Minimum conversion time of the output modules: (T
Terminal assignment for 2AO I HF (6ES7135-4MB02-0AB0)
Assignment
5
QI
1
6
n.c.
7
M
ana
8
n.c.
A8
AUX1
A7
AUX1
QI
: Current analog output, Channel n
•
n
M
: Ground of the module
•
ana
n.c.: Not connected (max. 30 V DC can be connected)
•
AUX1: Protective-conductor terminal or potential bus (freely usable
•
up to 230 VAC)
): 0.7 ms
DPmin
): 0.5 ms
WAmin
Notes
1
7