Table of Contents
Advertisement
The following is a guide of the menu options available by pressing the Menu button. Certain menu selections, which
are marked by an asterisk ( * ), may or may not be present depending on other menu settings.
HUMIDITY *
* Only appears as a menu item if Dehumidify is set to Yes, Aux Relay is set to Dehumidifier, or Aux Relay is set to
Humidity.
HUMIDITY
Setting
Cooling RH Target*
Heating RH Target*
Once all selections have been made, press the Done button to exit and return to menu. Press Next to navigate to the next setting.
USER SETTINGS
User Settings allow the user to customize various settings on the XR724 control. To access User Settings simply press
the Menu button once and "User Settings" will be displayed. To enter the User Settings menu, press the Select button,
then use the Next button to navigate through the options below. The default setting will be shown in brackets. After
each selection press the Done button to save changes. Certain menu selections, which are marked by an asterisk ( * ),
may or may not be present depending on other menu settings.
THERMOSTAT
Setting
Temperature Scale
Max Heat Setpoint
Min Cooling Setpoint
Time/Date*
If connected with Nexia,
then time and date are
provided by the network
Continuous Fan Airflow*
Fan Circulate On Time
Once all selections have been made, press the Done button to exit and return to menu. Press Next to navigate to the next setting.
4
XR724 USER GUIDE
MENU OPTIONS
Range
30% to 60% [50%]
10% to 45% [40%]
Range / Sub Setting
[Fahrenheit], Celsius
55 - [90] Degrees
[60] - 99 Degrees
Set Hour
Set Minutes
Day of Week
Year
Month
Date
DST Enable
35% - 100% [50%]
[10] - 55 minutes
Select the desired indoor relative humidity during cooling mode. Dehu-
midification must be enabled in the Installer Settings for this option to be
available.
Select the desired indoor relative humidity during heating mode.
Humidification must be enabled in the Installer Settings for this option to
be available.
Description / Range of Sub Settings
Select the temperature display scale
Select the highest heating setpoint allowed
Select the lowest cooling setpoint allowed
1 - 12 AM, 1 - 12 PM [12PM]
0 - 59 [0]
[Sun], Mon, Tue, Wed, Thr, Fri, Sat
[2013] - 2113
[Jan], Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec
[1] - 31
[Yes], No
Select the desired fan speed when the Fan Mode selected is Continuous
(variable speed blower required). Only available if ID Fan Type = Variable.
Select the desired amount of time the fan will cycle per hour when the Fan
Mode selected is Circ
Description
18-HD82D1-1B-EN
Hide quick links:
Advertisement
Table of Contents
