Fcc Statement - Ask Proxima Impression A10 User Manual

USER GUIDE

15 FCC STATEMENT

This equipment complies with the limits for a Class A computing device,
pursuant to Subpart J of Part 15 of FCC rules. Only peripherals (computer
input/output devices, terminals, printers, etc.) certified to comply with the
Class A limits may be attached to a computer that complies with Class A
limits. When connecting to a peripheral device, a shielded input/output cable
is required to ensure compliance with FCC rules. The shielded cable that
must be used is supplied with the equipment. Operation with non-certified
peripherals or non-shielded cables is likely to result in interference to radio
and TV reception.
This equipment generates and uses radio-frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
interference to radio and television reception. It has been tested and found
to comply with the limits for a Class A computing device in accordance with
the specifications in Subpart J of Part 15 of the FCC rules, which are
designed to provide reasonable protection against such interference when
operated in a commercial environment. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient the receiving antenna.
Relocate the projector with respect to the receiver.
Plug the equipment to a different outlet so that equipment
and receiver are on different branch circuits.
Fasten cables using mounting screws to ensure adequate EMI control.
You may require the following booklet from the Federal Communications
Commission (FCC): "How to identify and resolve radio and TV interference
problems", available from the U.S. Government Printing Office, Washington,
DC 20402, Stock No. 004-000-00345-4.
XGA LCD PROJECTOR
45