Display Icons; Language Setting; Recording Your Greeting Message; Other Settings - Panasonic KX-TGWA41 Operating Instructions Manual

Charge contacts
MINTERCOMN
MLINEN
MANS SYSN (Answer system)
n Control type
Soft keys
By pressing a soft key, you can select the
feature shown directly above it on the
display.
Navigator key
– MDN, MCN, MFN, or MEN: Scroll through
various lists and items.
– VOL. (Volume: MDN or MCN): Adjust the
receiver or speaker volume while talking.
– MFN W: View the phonebook entry.
– MEN CID (Caller ID): View the caller list.

Display icons

Handset display items
Item Meaning
The line is in use.
R When flashing:
– an incoming call is now
being received.
– the call is on hold.
Speakerphone is on.
(page 11)
Battery level
This is unviewed missed call.
New messages have been
recorded. (page 22)

Language setting

You can select either "English",
"Español", "Français" or "Português"
as the display language. The default setting is
"English".
1
MMenuN
2
MbN: "Phone Settings" a MSelectN
3
MbN: "Language" a MSelectN
For assistance, please visit http://shop.panasonic.com/support
TGWA41_(en)_OI_1226_ver005.pdf 9
Getting Started
4
MbN: Select the desired setting. a
MSelectN
5
MOFFN
Recording your greeting
message
You can record your own greeting message
instead of using a pre-recorded greeting
message. See page 21 for details.
1
MMenuN
2
MbN: "Ans. System" a MSelectN
3
MbN: "MB Greeting" or "Announce
Only" a MSelectN
4
MbN: "Record Greeting" or "Record
Ann. Only" a MSelectN
5
Record a greeting message. a MSaveN
R The greeting message is played back.
To stop playback, press MStopN.
6
MOFFN

Other settings

Line selection mode
The line selection mode determines which line
is selected when you press M
making/answering calls)
The following setting is available:
– "Auto" (default): When making a call, the
available line is selected automatically.
– "Line1" to "Line4": Corresponding line is
selected first. If that line is unavailable, the
next available line is selected.
1
MMenuN
2
MbN: "Line Settings" a MSelectN
3
MbN: "Priority Line" a MSelectN
4
MbN: Select the desired setting. a
MSelectN
5
MOFFN
/ N (when
9
2019/12/26 12:58:01