Table of Contents
Advertisement
Now you have an overall picture of how Ulead MovieFactory looks like. The next thing to do is
choose the right task that fits your need:
•
Start Project - New project: Choose this task if you are creating a new DVD MovieFactory
project. Please select an output disc format, and then click Next to add media clips. (See
page 8 for details.)
•
Start Project - Existing project: Choose this task if you already have a previous created
DVD MovieFactory project saved on a hard drive or disc. Please use the drop-down list or
the browse button to locate a project file (*.dwz), and then click Next to start editing. (See
page 8 for details.)
•
Edit Disc: Choose this task if you would like to edit your DVD+R/RW, DVD-R/RW, or an
existing DVD MovieFactory project directly on a recordable disc. Please select the disc location
on your computer, and then click Next to start editing. (See page 18 for details.)
•
Direct to Disc: Choose this task if you want to capture videos straight from your video
device and burn a disc immediately. Please select an output disc format, and then click Next
to capture videos, setup menus, and finally burn the disc. (See page 19 for details.)
•
Copy Disc: Choose Copy from - Disc if you want to make a disc-to-disc (VCD or SVCD)
copy or burn a disc from a DVD folder located in the hard drive or a disc. You can also
choose Copy from - Disc image file to copy a disc image file and burn onto a disc. Click
Next to go to the output step directly. (See page 19 for details.)
Advertisement
Table of Contents
