Table of Contents
Advertisement
Hardware installation Guide
Getting Started
The basic steps are:
1. Check USB Instant DVD package contents
2. Wire it up! - Audio and Video connectors
3. Install Application software
4. Plug it in! - Power and USB connection
5. Verify Hardware Installation
6. Start Making DVD Movies
Check USB Instant DVD Contents
Hardware:
(a) USB Instant DVD device
(b) 5 VDC Power supply
(c) 6 ft. USB Cable
(d) 6 ft. A/V In Cable (RCA video and audio to RCA video and 3.5 mm stereo)
(e) 9 ft. Audio out to TV/VCR cable (3.5 mm stereo w/female 3.5mm Y to R+L RCA audio)
(f) 9 ft. RCA Video cable
(g) 6 ft. SVHS Cable
USB Instant DVD for Mac 9
Advertisement
Table of Contents
