Initial Setup - Kogan 9 TU9220 Series User Manual

INITIAL SETUP

When you turn on the TV for the
first time, there will show a wizard
to guide you to finish the following
initial settings:
Step 1: Connect the Bluetooth
remote control. If you haven't a
Bluetooth remote control, please
just skip it.
The remote control supplied with your
Android TV has Bluetooth capabilities.
and HOME buttons
Press and hold
simultaneously to open the paring
mode of Bluetooth remote control.
Step 2: Select the menu language
as you need.
Step 3: Select whether or not to use
an Android phone to setup the TV.
If you want to use your Android phone
to setup the TV, please operate as the
on-screen instructions.
If you don't want to use your Android
phone to setup the TV, you can skip
directly to Step 4.
Step 4: Select whether or not to
connect your TV set to the wireless
network. This will not display if you
have connected this TV to the wired
network.
If you have connected the TV to the
wireless network, it will check for
updates like Google service updates
and so on. Then please select whether
or not to sign in to your Google account.
Step 5: Read to accept the Google
terms of service and privacy policy.
Step 6: Select whether or not to let
Google or third party to use your
TV location.
Step 7: Select whether or not to
allow Google to help improve your
Android TV.
Step 8: Introduction on main
functions of your Android TV.
Step 9: Select and install the
recommended applications from
Google. This step may not be available
depending on Google service.
Applications shown here vary by
di erent models or regions.
Step 10: Read the end user license
agreement.
Step 11: Choose the TV usage
environment between "Home"
and "Shop".
"Home" mode is recommended for
home viewing, while "Shop" mode is
used to demonstrate the TV in a
shop and the like. It will consume
more energy in "Shop" mode.
Step 12: Select your country.
9