GasAlertMicro 5/PID/IR
User Manual
%Vol CH
(LEL Sensors Only)
4
4
C
H
C
C
Note
If changing the measurement unit
from % LEL to % Vol. or from % Vol.
to % LEL, a calibration must be com-
pleted and the alarm setpoints
changed. For calibration information
and for alarm setpoint information
refer to
Calibration and Setting Alarm
Setpoints on page
48.
1.800.561.8187
Correction Factor (CF)
www.
.com
Note
Corrections factors are not applicable to CO
information@itm.com
sensors.
2